IRON Intel AR100 G2 - Motherboards

Motherboard Key Features

Physical Stats  
Form Factor
  • Proprietary
Dimensions
  • 7.5" x 6.75" (19.05cm x 17.15cm)
Processor/Cache  
CPU
  • Intel® Atom™ D510 processor
System Bus
  • DMI
System Memory  
Memory Capacity
  • Two 200-pin SO-DIMM sockets
  • Supports up to 4 GB of unbuffered, non-ECC DDR2 667MHz SO-DIMM (Single Channel)
Memory Type
  • DDR2 667MHz unbuffered, non-ECC SO-DIMM
DIMM Sizes
  • 256 MB, 512 MB, 1 GB, 2GB
Memory Voltage
  • 1.8V only
On-Board Devices  
Chipset
  • Intel ICH9R
  • Intel 82574L
SATA
  • Intel ICH9R SATA 3.0Gbps Controller
  • RAID 0, 1, 5, 10 support (Windows Only)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Winbond® WPCM450 BMC
Network Controllers
  • 2x Intel 82574L Gigabit Ethernet
  • Supports 10BASE-T, 100/1000BASE-TX, RJ45 output
Graphics
  • Onboard Matrox G200eW video
Super I/O
  • Winbond 83627DHG chip
Input / Output  
Serial ATA
  • 6 Serial ATA ports ( 3Gbps )
LAN
  • 2x RJ45 LAN port
USB
  • 8x USB 2.0 / 1.1 compatible
  • 2 rear + 3 headers (5 ports) + 1 Type A connector
VGA
  • 1x VGA port
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Port / Header
  • 1x Fast UART 16550 serial port
  • 1x internal header
System BIOS
BIOS Type
  • 8Mb Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • DMI 2.3
  • PCI 2.2
  • ACPI 1.0 / 2.0 / 3.0
  • USB Keyboard support
  • SMBIOS 2.3
Expansion Slots  
PCI-Express
  • 1 (x4) PCI-Express (in x16 slot)
Management  
Software
  • IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
  • Super Doctor III
  • Watch Dog
Power Configurations
  • ACPI/APM Power Management
  • Main Switch Override Mechanism
  • Suspend to RAM (STR)
  • Power-on mode control for AC power recovery
  • Internal / External modem remote ring-on
PC Health Monitoring  
CPU
  • Monitors for CPU Cores, +3.3V, +5V, +12V, +3.3V Standby, VBAT, Memory, Chipset
  • CPU Core 1-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
FAN
  • Total of two 4-pin fan headers
  • 2 x fans with tachometer monitoring
  • Status monitor for speed control
  • Status monitor for on / off control
  • Support 3-pin fans (without speed control)
  • Low noise fan speed control
  • Pulse Width Modulated (PWM) fan conn.
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 2 x Fan Connectors
  • I2C temperature sensing logic
  • Thermal Monitor 2 (TM2) Support
LED
  • CPU / System Overheat LED
Other Features
  • Chassis intrusion Detection
  • Chassis intrusion Header
  • SDDC Support
Operating Environment / Compliance
RoHS
  • RoHS Compliant 6/6, Pb Free
Environmental Spec.
  • Operating Temperature: 0° to 55°C
  • Non-operating Temperature: -40° to 70°C
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5 to 95% (non-condensing)
Regulatory  
FCC
  • Class B